Approximately 50% assembly is required. BB and crank are installed. Headset cups are pressed. Handlebar and stem are already mounted with brake levers, grips and shifter lever.
Rear derailleur needs to be installed. All cables are cut to length and need to be routed. Brake calipers need to be bolted to the frame and fork. The fork steerer tube has been pre-cut. The 6-bolt brake rotors need to be installed, and tires need to be inflated.
All wheels have been pre-taped for tubeless conversion, but tubes have been supplied. To convert to tubeless, all that is needed are valves and sealant.
Total time required for assembly is about 30 minutes for a competent bike mechanic.
Note: assembly should NOT be attempted if you have never assembled a bike before. A bike that is NOT properly assembled could result in potential serious injury to the rider. We highly recommend bringing your new RSD bike into a shop for assembly by a professional.