• Call us at 416-773-0030
• Email us at info@rsdbikes.com
• Chat with us: via the Drift Chat Line on the site

As stated in the Shop page under each product, there is around 50% assembly required. Each bike takes approximately 30min to 1 hour for an experienced mechanic. Assembly should not be attempted if you’ve never done it before. A bike that is not properly assembled could result in potential serious injuries. Take it to a shop near you. https://rsdbikes.com/assembly-requirements/

No, the $100, $250 or $500 is a required deposit in order to secure a specific size, colour or build that is currently not in stock. The balance will be due prior to shipping. These amounts are labelled as Deposit or Pre-Order Deposit

Once the pre-order is placed and the deposit paid, there are no further actions needed from you. We will contact you 2-3 weeks prior to the scheduled delivery to confirm your shipping information as well as the details of your order. Once all is confirmed, we will send you an invoice for the balance. We DO NOT automatically charge the original card used for the deposit. The balance can be settled with the same or any other cards.

yes, we accept partial payments to increase the amount of your deposit. The full balance has to be paid prior to shipping. should you wish to make additional partial deposits, please email us. info@rsdbikes.com and reference your order #

Yes, all of our frames use 44mm Straight Head Tubes. That means that you can use any and all steer tubes styles and sizes. When the Headset is provided with the frame, it is for tapered steer tube forks.

We use ZS44/28.6 Top (Zero Stack) and EC44/40 Bottom (External Cup). We also only use tapered steerer tube forks.

BB shell is 100mm Threaded.
You need a 190/197mm rear spacing crank with a minimum 100mm clearance from the center of the BB to the inside clearance dimension of the crank arms. Minimum Q Factor is 220mm.
We recommend any of these Race Face 190/197mm cranks: Next SL, Next R, Turbine, Aeffect and Ride. Each of these crank will come with 2 x 11mm spacers.
SRAM cranks, even though 190/197mm DO NOT FIT. The Q Factor is too low and therefore the crank arms will not clear the stays.

Yes, in 2 different places. One is located mid page on the Specs & Geometry Tab as a pull down menu. Just extend the (+) to see the Chart. The other is located at the bottom of the Geometry chart which is also mid page and locate the pull down menu (+) for the Geometry chart and choose your preferred standard: Imperial or Metric.

Some tire/rim combo may differ from brand to brand and from year to year, so please use your discretion. These are only guidelines.

• Mayor V3 / V4 / V5 – 26×5.05/100mm. 27.5×4.0/50mm, 29×3.0/50mm
• MiddleChild V1 / V2 – 27.5×2.8/50mm, 29×2.6/50mm
• Sergeant Ti – 27.5×3.5/50mm, 29×3.0/50mm
• Sergeant AL V2 – 27.5×3.8/50mm, 29×2.4/35mm
• Sergeant AL V3 – 27.5×4.0/50mm, 29×3.0/50mm
• Big Chief – 29×2.8/50mm, 27.5×2.8/50mm
• Catalyst – 700c 2.25/30mm or 27.5×2.6/40mm
• Sheriff – 26×5.05/100mm, 27.5×4.0/50mm, 29×3.0/50mm

• Mayor V3 – 120mm
• Mayor V4 – 120mm
• MiddleChild – 150mm
• Wildcat – 150mm
• Sergeant Ti – 150mm
• Sergeant AL V2 – 150mm
• Sergeant AL V3 – 150mm
• Big Chief – 140mm
• Catalyst – 100mm
• Sheriff – 120mm

No, it doesn’t. the Frame Only option is for the frame only

No, you can’t. You will void your warranty. No one makes sliders thick enough to accommodate the extra spacing. That being said, a lot of hub manufacturer offer a conversion kit. Check with them.

Yes and No. We might have some parts in stock. Depends on availability. We only have access to other parts from the manufacturers we currently work with, It also all depends in their available stock. If it’s a brand we never worked with, then sorry, we can’t.

No, we don’t. We designed each of our bikes from the ground up to be produced in large quantities, so we cannot accommodate single designs.

The short answer is that we offer a Lifetime warranty for manufacturer’s defects on all of our frames to the original owners only. Make sure to register your frame here. See the full Warranty details here

Yes, it will be voided. Each of our frames are tested as sold. If the frame is altered in anyway, it could compromise the strength of the frame and therefore void the warranty. See the full Warranty details here

Conversion to e-bike, regardless of the system, will void your warranty.

Yes, we are located in Toronto, ON. CANADA and that’s where everything ships from. See shipping conditions on the Shop page. If you are located outside Canada’s 10 Provinces or the U.S. Lower 48 States, email us for a quote: info@rsdbikes.com

Yes, we can BUT it can be very expensive to ship from Canada. That being said, we just recently negotiated better shipping rates to Western Europe. It will be a soft launch for now. If all goes well, we can negotiate better rates for everywhere else. Email us for a quote: info@rsdbikes.com

Only in Philippines for now bicicletaph.com – bikes@bicicletaph.com –  We welcome other Distributor inquiries. Email us for more info: info@rsdbikes.com

Absolutely. We can assemble your bike for $250.00 CAD. It generally takes 24 hours

Yes, you can pick up your new bike or frame from our office. We will deduct the shipping cost, if it’s already included, from the total price.